MOT Status
ValidMileage
120,647 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))
Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
suspension components corroded all around
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps both sides (4.7.2 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
exhust heat shield insucre
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure tyre face (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Nail in tyre ()
Rear exhaust mount broken.
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Direction indicator slightly discoloured bothsides (4.4.3 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
rear exhaust clamp broken
Front registration plate delaminated but not likely to be misread (6.3.1d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front registration plate delaminated but not likely to be misread (6.3.1d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o\s front tyre worn and perished
rear tyres perished
Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
n\s rear tyre wall perished
Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
n\s rear tyre slightly perished
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
n\s rear tyre slightly perished
wet conditions
How Reliable is the Ford Focus?
Based on 28,316,889 MOT tests across 2,072,617 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ07 ZPW is a 2007 Ford Focus in Silver with a 1,596cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 77.3%.
Across all 2007 Ford Focus models, the average MOT pass rate is 73.9% with a typical mileage of 74,402 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Focus fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,055,468 recorded failures. If you're considering buying BJ07 ZPW, it's worth having these areas checked by a mechanic before committing.
The Ford Focus typically stays on UK roads for around 27 years. At 19 years old, this Ford Focus is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BJ07 ZPW?
You can check the full history of BJ07 ZPW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ07 ZPW registered?
BJ07 ZPW is a 2007 Ford Focus, first registered on 16 April 2007.
Is BJ07 ZPW safe to buy?
The MOT history for BJ07 ZPW shows 22 tests with a 77.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ07 ZPW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ07 ZPW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.