MOT Status
ExpiredMileage
100,921 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component corroded and seriously weakened sub frame mounting bush corroded (5.3.3 (b) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Tyre pressure monitoring system warning lamp indicates a fault (5.2.3 (h) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Tyre pressure monitoring system warning lamp indicates a fault (5.2.3 (h) (i))
Nearside Front Front wheel bearing rough when rotated (2.5.A.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit 1.6-2mm (4.1.E.1)
Nearside Front wheel bearing has a humming noise when spun
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Registration plate lamp not working (1.1.C.1d)
front brakes release unevenly (3.7.B.4)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit 1.6-2mm (4.1.E.1)
Nearside Front wheel bearing has a humming noise when spun
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Chrysler Sebring?
Based on 30,426 MOT tests across 2,563 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ08 VGE is a 2008 Chrysler Sebring in Black with a 1,998cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 69.2%.
Across all 2008 Chrysler Sebring models, the average MOT pass rate is 72.6% with a typical mileage of 66,919 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chrysler Sebring fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,331 recorded failures. If you're considering buying BJ08 VGE, it's worth having these areas checked by a mechanic before committing.
The Chrysler Sebring typically stays on UK roads for around 19 years. At 18 years old, this Chrysler Sebring is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BJ08 VGE?
You can check the full history of BJ08 VGE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ08 VGE registered?
BJ08 VGE is a 2008 Chrysler Sebring, first registered on 30 April 2008.
Is BJ08 VGE safe to buy?
The MOT history for BJ08 VGE shows 13 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ08 VGE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ08 VGE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.