MOT Status
ExpiredMileage
146,202 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Underneath tray fited at the time of test
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Underneath tray fited at the time of test
Child Seat fitted not allowing full inspection of adult belt ()
Items removed from driver's view prior to test ()
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Too clean to get an emissions reading
Offside Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Too clean to get an emissions reading
engine cover fitted
undertray fitted
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
engine cover fitted
undertray fitted
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
n/s & o/s/f tyres badly cracked and perished sidewalls
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Service brake juddering slightly (3.7.C.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
rear brake pads worn uneaven
n/s & o/s/f tyres badly cracked and perished sidewalls
TPMS warning light indicates fault
How Reliable is the Chrysler 300?
Based on 14,168 MOT tests across 1,070 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ10 XGS is a 2010 Chrysler 300 in Silver with a 2,987cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 72.2%.
Across all 2010 Chrysler 300 models, the average MOT pass rate is 73.1% with a typical mileage of 73,390 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chrysler 300 fails its MOT is parking brake: efficiency below requirements, accounting for 722 recorded failures. If you're considering buying BJ10 XGS, it's worth having these areas checked by a mechanic before committing.
The Chrysler 300 typically stays on UK roads for around 21 years. At 16 years old, this Chrysler 300 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BJ10 XGS?
You can check the full history of BJ10 XGS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ10 XGS registered?
BJ10 XGS is a 2010 Chrysler 300, first registered on 28 May 2010.
Is BJ10 XGS safe to buy?
The MOT history for BJ10 XGS shows 18 tests with a 72.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ10 XGS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ10 XGS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.