MOT Status
ValidMileage
112,870 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ16 DGU is a 2016 Mazda 6 in Red with a 2,191cc diesel engine. This vehicle has been through 9 MOT tests with a personal pass rate of 88.9%.
Across all 2016 Mazda 6 models, the average MOT pass rate is 84.0% with a typical mileage of 58,662 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying BJ16 DGU, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 10 years old, this Mazda 6 is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of BJ16 DGU?
You can check the full history of BJ16 DGU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ16 DGU registered?
BJ16 DGU is a 2016 Mazda 6, first registered on 31 March 2016.
Is BJ16 DGU safe to buy?
The MOT history for BJ16 DGU shows 9 tests with a 88.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ16 DGU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ16 DGU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.