MOT Status
ExpiredMileage
257,971 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
both front headlamps deteriorated.
slight play n/s f inner rack and pinion ball joint.
Brake pipe slightly corroded front to rear (3.6.B.2c)
Headlamp deteriorated but light output not reduced BOTH FRONT (1.7.5a)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake pipe slightly corroded front to rear (3.6.B.2c)
Headlamp deteriorated but light output not reduced both front (1.7.5a)
Macpherson strut corroded but not seriously weakened both front (2.4.G.1)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension arm rubber bush deteriorated but not resulting in excessive movement both front inner rearmost (2.4.G.2)
coil spring corroded both front (2.4.C.1b)
Brake pipe slightly corroded front to rear (3.6.B.2c)
Headlamp deteriorated but light output not reduced both front (1.7.5a)
Macpherson strut corroded but not seriously weakened both front (2.4.G.1)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension arm rubber bush deteriorated but not resulting in excessive movement both front inner rearmost (2.4.G.2)
Tyre tread depth below requirements of 1.6mm both front (4.1.E.1)
coil spring corroded both front (2.4.C.1b)
Brake pipe slightly corroded front to rear (3.6.B.2c)
Macpherson strut corroded but not seriously weakened both front (2.4.G.1)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
coil spring corroded both front (2.4.C.1b)
Macpherson strut corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Macpherson strut corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
slight noise from nearside front wheelbearing
Offside Front front brake binding (3.7.B.1)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
slight noise from nearside front wheelbearing
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside front brake grabbing slightly (3.7.A.2b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension arm has excessive play in a pin/bearing (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside rear brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
rear brake application uneven (3.7.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Nail in nearside front tyre
Nail in offside front tyre
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Front brake disc slightly pitted (3.5.1h)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc slightly pitted (3.5.1h)
Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
How Reliable is the Peugeot 306?
Based on 3,183,877 MOT tests across 366,849 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ51 ABU is a 2001 Peugeot 306 in Silver with a 1,997cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2001 Peugeot 306 models, the average MOT pass rate is 68.9% with a typical mileage of 85,498 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 306 fails its MOT is parking brake: efficiency below requirements, accounting for 180,645 recorded failures. If you're considering buying BJ51 ABU, it's worth having these areas checked by a mechanic before committing.
The Peugeot 306 typically stays on UK roads for around 33 years. At 25 years old, this Peugeot 306 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BJ51 ABU?
You can check the full history of BJ51 ABU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ51 ABU registered?
BJ51 ABU is a 2001 Peugeot 306, first registered on 27 September 2001.
Is BJ51 ABU safe to buy?
The MOT history for BJ51 ABU shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ51 ABU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ51 ABU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.