2002 Ford Galaxy

Front Bumper mountings corroded but not likely to become detached front bumper support (6.1.4 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))

Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Body panel corroded and likely to cause injury wheel arch outer sill (6.2.1 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))

Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside door mirror insecure but still funtional

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak dipstick tube broken ()

Rear No rear seats fitted

Front Brake hose excessively deteriorated both (3.6.B.4d)

Front Brake pipe excessively corroded both (3.6.B.2c)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Front Outer Brake pipe excessively corroded both (3.6.B.2c)

Rear registration plate deteriorated (6.3.1d)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Battery insecure (1.9.1)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Inner Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Outer Steering rack gaiter split (2.2.D.2d)

Nearside Front Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Outer Steering rack gaiter insecure (2.2.D.2d)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear coil spring broken (2.4.C.1a)

Rear Trailer electrical socket insecure (1.9.3a)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim beam image kick up to the offside (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)