MOT Status
ExpiredMileage
91,060 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings centre outer sill (6.1.B.2)
Offside Front Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer and iner sill and arch (6.1.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Vehicle structure has slight corrosion outer and iner (6.1.B.2)
oil leak
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Items removed from driver's view prior to test
Nearside Rear Sub-frame synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Sub-frame synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear coil spring incomplete (2.4.C.1a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear coil spring incomplete (2.4.C.1a)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Centre Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Registration plate lamp not working (1.1.5c)
Nearside Stop lamp not working (1.2.1b)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Rear Exhaust system not adequately supported (7.1.1)
o/s/f tyre bald inside edge
Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Rear coil spring fractured (2.4.C.1a)
Rear Exhaust system not adequately supported (7.1.1)
Rear Registration plate lamp not working (1.1.5c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front coil spring incomplete (2.4.C.1a)
Offside Headlamp aim too low (1.8)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ53 MTY is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BJ53 MTY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BJ53 MTY?
You can check the full history of BJ53 MTY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ53 MTY registered?
BJ53 MTY is a 2003 Ford Ka, first registered on 26 November 2003.
Is BJ53 MTY safe to buy?
The MOT history for BJ53 MTY shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ53 MTY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ53 MTY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.