MOT Status
ExpiredMileage
83,788 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheelarch (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheelarch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Power steering fluid level below minimum (2.3.1)
Power steering inoperative (2.3.3a)
Power steering pipe(s) or hose(s) leaking (2.3.3b)
Windscreen washer provides insufficient washer liquid (8.2.3)
all 4 brake discs are rusty
Engine management light is on
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Registration plate lamp not working (1.1.C.1d)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
front brake binding (3.7.B.1)
Engine management light is on
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
front brake discs in poor condition
rearbrake discs in poor condition
Nearside rear parking brake recording little or no effort (3.7.B.6a)
rear brake application uneven (3.7.B.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
front brake discs in poor condition
rearbrake discs in poor condition
front brake discs in poor condition
heavy surface corrosion to underside and suspension componenets
offside outer sill corroded thin
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
front brake discs in poor condition
heavy surface corrosion to underside and suspension componenets
offside outer sill corroded thin
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear brake disc slightly pitted (3.5.1h)
front tyres wearing on inside edge
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ53 ZXZ is a 2003 Mazda 323 in Silver with a 1,598cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 62.5%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying BJ53 ZXZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BJ53 ZXZ?
You can check the full history of BJ53 ZXZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ53 ZXZ registered?
BJ53 ZXZ is a 2003 Mazda 323, first registered on 29 September 2003.
Is BJ53 ZXZ safe to buy?
The MOT history for BJ53 ZXZ shows 16 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ53 ZXZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ53 ZXZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.