MOT Status
ExpiredMileage
104,205 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))
Nearside Rear Suspension arm pin or bush excessively worn trialing arm (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush excessively worn trialing arm (5.3.4 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan /jacking point (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan /jacking point (5.3.6 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Body component slightly loose bumper (6.2.1 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Body component slightly loose bumper (6.2.1 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Body component slightly loose rear bumper (6.2.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill under wheel arch (5.3.6 (a) (i))
Body component slightly loose rear bumper (6.2.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Front Nail in tyre ()
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))
Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
headlamp lenses slightly deteriorated
offside and nearside rear tyres 3mm
Front Registration plate inscription illegible (0.1 (b))
Offside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
headlamp lenses slightly deteriorated
offside and nearside rear tyres 3mm
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Sill covers fitted not allowing full inspection of sills
Slight oil leak
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Outer Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
rear exhaust system heavily corroded
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
all tyres low on inner edges
How Reliable is the Rover 45?
Based on 849,212 MOT tests across 72,661 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ54 NWG is a 2004 Rover 45 in Silver with a 1,588cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2004 Rover 45 models, the average MOT pass rate is 74.2% with a typical mileage of 49,972 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover 45 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 48,934 recorded failures. If you're considering buying BJ54 NWG, it's worth having these areas checked by a mechanic before committing.
The Rover 45 typically stays on UK roads for around 26 years. At 22 years old, this Rover 45 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BJ54 NWG?
You can check the full history of BJ54 NWG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ54 NWG registered?
BJ54 NWG is a 2004 Rover 45, first registered on 12 October 2004.
Is BJ54 NWG safe to buy?
The MOT history for BJ54 NWG shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ54 NWG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ54 NWG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.