2004 Lexus IS200

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front brake disc back plate deteriating

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Tyre has ply or cords exposed both (5.2.3 (d) (ii)) DANGEROUS

Tyre tread depth below requirements of 1.6mm front and rear (5.2.3 (e)) DANGEROUS

Nearside Front brake disc back plate deteriating

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Headlamp light source and lamp not compatible (4.1.4 (c))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Child Seat fitted not allowing full inspection of adult belt ()

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Child Seat fitted not allowing full inspection of adult belt ()

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front coil spring broken (2.4.C.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Ball joint has excessive play excessive lift (2.2.B.1f)

Offside Front Ball joint has excessive play excessive lift (2.2.B.1f)

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Nearside Front Lower Radius arm has slight play in a ball joint (2.4.G.2)

Offside Front Lower Radius arm has slight play in a ball joint (2.4.G.2)

rear brake application uneven (3.7.B.2)

Nearside Front Lower Radius arm has slight play in a ball joint (2.4.G.2)

Offside Front Lower Radius arm has slight play in a ball joint (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)