2005 Peugeot 1007

Coil spring corroded both front (5.3.1 (b) (i))

Coil spring corroded both rear (5.3.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Tyre worn close to legal limit/worn on edge both front on 2mm (5.2.3 (e))

Coil spring corroded both front (5.3.1 (b) (i))

Coil spring corroded both rear (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bush (5.3.4 (a) (i))

Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Macpherson strut fractured (5.3.3 (b) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Nearside Front Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Central Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Vehicle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Vehicle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front Tyre tread depth below requirements of 1.6mm both (5.2.3 (e)) DANGEROUS

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Fuel tank leaking (6.1.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Macpherson strut modified but not seriously weakened (5.3.3 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Play in steering rack inner joint(s) ()

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly slight stiff (2.5.B.1b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear coil spring corroded (2.4.C.1b)

exhaust corroded

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust rear section deteriorated

offside rear wheel bearing makes a slight noise when rotated

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front coil spring broken (2.4.C.1a)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust rear section deteriorated

offside rear wheel bearing makes a slight noise when rotated

Oil leak

nearside & offside rear tyres slightly deformed

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)