MOT Status
ExpiredMileage
108,337 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Side repeater slightly discoloured both (1.4.A.2f)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive bulk head (2.4.A.3)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive bulk head (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Power steering component(s) has slight seepage from a component (2.3.3b)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
both front lower sills holed and corroded
oil leak
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Front Side repeater slightly discoloured both (1.4.A.2f)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive bulk head (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive bulk head (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Power steering component(s) has slight seepage from a component (2.3.3b)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
both front lower sills holed and corroded
coolant leak
nearside washer jet blocked
oil leak
offside rear tyre worn on inner edge and inner side wall split
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Oil leak
Power steering component(s) has slight seepage from a component (2.3.3b)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
nearside front tyre slightly worn on inner edge
offside rear tyre void of tread on inner edge and inner sidewall split
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Power steering component(s) has slight seepage from a component (2.3.3b)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
nearside front tyre slightly worn on inner edge
offside rear tyre void of tread on inner edge and inner sidewall split
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Side repeater slightly discoloured (1.4.A.2f)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Oil leak
Power steering component(s) has slight seepage from a component (2.3.3b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
nearside washer jet blocked
rear exhaust rubber missing
Front position lamp(s) not working (1.1.A.3b)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Side repeater slightly discoloured (1.4.A.2f)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Oil leak
Power steering component(s) has slight seepage from a component (2.3.3b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
nearside washer jet blocked
rear exhaust rubber missing
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Registration plate lamp not working (1.1.C.1d)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Headlamp aim too low (1.8)
Nearside Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Headlamp aim too low (1.8)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear registration plate delaminated (6.3.1d)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Front Headlamp aim too high (1.8)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Headlamp aim too low (1.6.D2)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Front constant velocity joint is excessively worn (2.5.C.1b)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Front Front constant velocity joint is slightly worn (2.5.C.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK02 MBY is a 2002 Peugeot 206 in Black with a 1,124cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 50%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BK02 MBY, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK02 MBY?
You can check the full history of BK02 MBY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK02 MBY registered?
BK02 MBY is a 2002 Peugeot 206, first registered on 26 April 2002.
Is BK02 MBY safe to buy?
The MOT history for BK02 MBY shows 18 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK02 MBY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK02 MBY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.