MOT Status
ExpiredMileage
130,996 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Body panel corroded and likely to cause injury (6.2.1 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Rear Child Seat fitted not allowing full inspection of adult belt ()
Vehicles internal headlight adjuster altered to recheck lights ()
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Rear Child Seat fitted not allowing full inspection of adult belt ()
Rear Registration plate insecure (0.1 (a))
Vehicles internal headlight adjuster altered to recheck lights ()
Front Exhaust has a minor leak of exhaust gases joint (7.1.2)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Brake load sensing valve seized (3.6.E.3)
Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Front Exhaust has a minor leak of exhaust gases joint (7.1.2)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
All standard equipment guards fitted at time of test not allowing full inspection
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Centre Rear Brake pipe excessively corroded (3.6.B.2c)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake load sensing valve seized (3.6.E.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front brake drum worn, pitted or scored, but not seriously weakened (3.5.1i)
Vehicle's internal headlight adjuster altered to recheck lights
Brake load sensing valve seized (3.6.E.3)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Front brake drum worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Vehicle's internal headlight adjuster altered to recheck lights
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
poly v belt heavily cracked and worn
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
front exhaust pipe leaking around bracket (note pipe is part of cat)
poly v belt heavily cracked
rear wiper split
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Registration plate lamp not working (1.1.5c)
Offside Side repeater incorrect colour (1.4.A.2f)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Tie bar/rod has slight play in a ball joint (2.4.G.2)
front discs worn and corroded (not below limit)
Indicator switch faulty (1.4.A.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK02 ZWF is a 2002 Peugeot 206 in Blue with a 1,124cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BK02 ZWF, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK02 ZWF?
You can check the full history of BK02 ZWF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK02 ZWF registered?
BK02 ZWF is a 2002 Peugeot 206, first registered on 1 May 2002.
Is BK02 ZWF safe to buy?
The MOT history for BK02 ZWF shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK02 ZWF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK02 ZWF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.