MOT Status
ExpiredMileage
161,751 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Headlamp aim too high (1.8)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear wheel bearing rough when rotated (2.6.1)
Rear Brake pipe excessively corroded left to right (3.6.B.2c)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS
Nearside Front Body has slight corrosion bulkhead (6.1.B.2)
Nearside Front Seat belt flexible stalk damaged but not likely to lead to failure under load (5.2.4a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak ()
Steering column top bearing slightly worn (2.1.2c)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brake pipe slightly corroded n/s and o/s front to rear (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)
Brake valve retaining device insecure (3.6.A.2d)
Driver's seat insecure (6.2.A.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Tyre tread depth below requirements of 1.6mm n/s and o/s rear and n/s and o/s front (4.1.E.1) DANGEROUS
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brake pipe slightly corroded n/s and o/s front to rear (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)
Nearside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
nsr tyre slight cracks in wall
Brake load sensing valve has been removed and was fitted as standard (3.6.E.2)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Coil spring not correctly located (2.4.C.2)
Offside Front Suspension arm ball joint dust cover missing (2.4.G.2)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
nsr tyre slight cracks in wall
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Headlamp not working on main beam (1.7.5a)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Stop lamp not working (1.2.1b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 306?
Based on 3,183,877 MOT tests across 366,849 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK02 ZYY is a 2002 Peugeot 306 in Silver with a 1,868cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2002 Peugeot 306 models, the average MOT pass rate is 70.5% with a typical mileage of 84,923 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 306 fails its MOT is parking brake: efficiency below requirements, accounting for 180,645 recorded failures. If you're considering buying BK02 ZYY, it's worth having these areas checked by a mechanic before committing.
The Peugeot 306 typically stays on UK roads for around 33 years. At 24 years old, this Peugeot 306 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK02 ZYY?
You can check the full history of BK02 ZYY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK02 ZYY registered?
BK02 ZYY is a 2002 Peugeot 306, first registered on 1 May 2002.
Is BK02 ZYY safe to buy?
The MOT history for BK02 ZYY shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK02 ZYY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK02 ZYY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.