MOT Status
ExpiredMileage
102,745 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill two pklaces (6.1.B.2)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak ()
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis leg (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill to floor (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis leg (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
both front outer sills corroded but not considered excessive.
o/s rear inner sill corroded.(not considered structural).
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Suspension component mounting prescribed area is excessively corroded floor in 2 places (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing/sill end in 2 places (2.4.A.3)
Offside Steering rack gaiter insecure (2.2.D.2d)
Sub-frame rubber bush deteriorated resulting in excessive movement both rear axle bushes (2.4.G.2)
both front outer sills corroded but not considered excessive.
o/s rear inner sill corroded.(not considered structural).
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
engine management warning lamp on
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside front brake fluctuating, but not excessively (3.7.B.3)
engine management warning lamp on
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Floor rusty nearside front.
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Floor rusty nearside front.
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyres sidewalls cracked and splitting
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK03 AAX is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BK03 AAX, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK03 AAX?
You can check the full history of BK03 AAX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK03 AAX registered?
BK03 AAX is a 2003 Ford Ka, first registered on 26 March 2003.
Is BK03 AAX safe to buy?
The MOT history for BK03 AAX shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK03 AAX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK03 AAX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.