MOT Status
ExpiredMileage
212,661 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front coil spring corroded (2.4.C.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front coil spring corroded (2.4.C.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Play in steering rack inner joint(s)
Play in steering rack inner joint(s)
Brake pedal spongy (3.3.B.1b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Side repeater not working (1.4.A.2c)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Ball joint has slight play (2.2.B.1f)
Nearside Headlamp aim too low and too far to the left. (1.8)
Offside Headlamp aim too low and too far to the right. (1.8)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Front coil spring corroded (2.4.C.1b)
Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brakes imbalanced across an axle (3.7.B.5b)
Centre Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Rear registration plate deteriorated (6.3.1d)
Front coil spring corroded (2.4.C.1b)
Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
Oil leak
Rear Brake load sensing valve linkage stiff (3.6.E.3)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both windscreen wipers slightly smearing
rear (both sides (SEE REPORT)) Service brake Your vehicle has only just met the required service brake efficiency. It would appear that the braking system requires adjustment or repair.
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
Oil leak
Rear Brake load sensing valve linkage stiff (3.6.E.3)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both windscreen wipers slightly smearing
rear (both sides (SEE REPORT)) Service brake Your vehicle has only just met the required service brake efficiency. It would appear that the braking system requires adjustment or repair.
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake load sensing valve linkage seized (3.6.E.3)
front brakes release unevenly (3.7.B.4)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust has a major leak of exhaust gases (7.1.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear rear brake recording little or no effort (3.7.B.5a)
Service brake: efficiency below requirements (3.7.B.7)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK03 DWV is a 2003 Peugeot 206 in Blue with a 1,360cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 57.1%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BK03 DWV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK03 DWV?
You can check the full history of BK03 DWV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK03 DWV registered?
BK03 DWV is a 2003 Peugeot 206, first registered on 14 March 2003.
Is BK03 DWV safe to buy?
The MOT history for BK03 DWV shows 21 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK03 DWV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK03 DWV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.