MOT Status
ExpiredMileage
136,234 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Bonnet release lever difficult to operate
Brake pipe corroded, covered in grease or other material Both front to rear pipes corroded (1.1.11 (c))
Exhaust noisy (8.1.1 (a))
Fuel tank slightly loose Support strap corroded (6.1.3 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Play in steering rack inner joint(s) ()
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Windscreen washer not working (3.5 (a))
Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Insecure (6.1.7 (g) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Bonnet release lever difficult to operate
Brake pipe corroded, covered in grease or other material Both front to rear pipes corroded (1.1.11 (c))
Exhaust noisy (8.1.1 (a))
Fuel tank slightly loose Support strap corroded (6.1.3 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Play in steering rack inner joint(s) ()
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Tyre worn close to the legal limit and perished (4.1.E.1)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Tyre worn close to the legal limit and perished (4.1.E.1)
Exhaust blow
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust blow
rear exhaust silencer weak
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
rear exhaust silencer weak
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear exhaust silencer weak.
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
front brake discs worn
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
front brake discs worn
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Headlamp aim too high (1.8)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK03 HTZ is a 2003 Peugeot 206 in Silver with a 1,997cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BK03 HTZ, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK03 HTZ?
You can check the full history of BK03 HTZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK03 HTZ registered?
BK03 HTZ is a 2003 Peugeot 206, first registered on 17 May 2003.
Is BK03 HTZ safe to buy?
The MOT history for BK03 HTZ shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK03 HTZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK03 HTZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.