MOT Status
ExpiredMileage
117,293 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Drive shaft joint excessively worn Very noisey (6.1.7 (c) (i))
Offside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Offside Front Suspension arm attachment bracket/mounting insecure and impairing directional stability Ball joint to hub (5.3.3 (a) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Bonnet front edge corroded
Nearside Front Inner Tyre worn close to legal limit/worn on edge Edge ware (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Bonnet corrodded across front
Brake pipe slightly corroded Pipe ends at lsv (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Child Seat fitted not allowing full inspection of adult belt ()
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint Link rod (2.4.G.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear fog lamp switch faulty Glued in permanent on position switch broken for lights but works (1.3.1a)
Bonnet corrodded across front
Brake pipe slightly corroded Pipe ends at lsv (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Child Seat fitted not allowing full inspection of adult belt ()
Bonnet corroded at front
Nearside Brake pipe slightly corroded To lsv (3.6.B.2c)
Nearside Front Anti-roll bar linkage has slight play in a ball joint Link rod (2.4.G.2)
Offside Front Tyre worn close to the legal limit 2.5mm (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Child Seat fitted not allowing full inspection of adult belt ()
Wiper blades split
Brakes imbalanced across an axle (3.7.B.5b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Braking system leaking (3.6.A.1)
Offside rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve seized (3.6.E.3)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both front tyres are worn on inner edge
Nearside Front All position lamps not working (1.1.A.3b)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Front Brake Discs are worn/corroded
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
Offside Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Front Brake Discs are worn/corroded
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brake load sensing valve linkage stiff (3.6.E.3)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nail in nearside rear tyre
Nail in nearside front tyre
Nail in offside rear tyre
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Outer Front brake disc slightly scored (3.5.1h)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Oil leak
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK03 HVC is a 2003 Peugeot 206 in Blue with a 1,398cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BK03 HVC, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK03 HVC?
You can check the full history of BK03 HVC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK03 HVC registered?
BK03 HVC is a 2003 Peugeot 206, first registered on 31 March 2003.
Is BK03 HVC safe to buy?
The MOT history for BK03 HVC shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK03 HVC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK03 HVC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.