MOT Status
ExpiredMileage
103,911 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Tyre(s) incorrect because tyres with different aspect ratios are fitted on the same axle. (4.1.A.1a)
Nearside Headlamp aim too low (1.8)
Nearside Steering rack gaiter split (2.2.D.2d)
Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp not working on main beam (1.7.5a)
Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Nearside Headlamp insecure (1.7.3)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Lower Suspension arm has excessive play in a pin/bearing (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Horn not working (1.6.2a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear coil spring fractured (2.4.C.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front brake disc slightly pitted (3.5.1h)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Ball joint has excessive play (2.2.B.1f)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Registration plate lamp not working (1.1.5c)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK03 LFW is a 2003 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BK03 LFW, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK03 LFW?
You can check the full history of BK03 LFW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK03 LFW registered?
BK03 LFW is a 2003 Ford Ka, first registered on 30 March 2003.
Is BK03 LFW safe to buy?
The MOT history for BK03 LFW shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK03 LFW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK03 LFW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.