MOT Status
ValidMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak, but not excessive (8.4.1 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Headlamp aim too low Headlamp damaged (4.1.2 (a))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords split (5.2.3 (d) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords split (5.2.3 (d) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords split (5.2.3 (d) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
number 3 injector leaking
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced and nsr outer sil (6.1.1 (c) (i))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/s/front inner plastic wing insecure.
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Registration plate lamp not working (1.1.C.1d)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS
Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/s/front inner plastic wing insecure.
Brake pipe slightly corroded (3.6.B.2c)
Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.4.G.2)
Rear Shock absorber has a light misting of oil both (2.7.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Tyre worn close to the legal limit both on 3mm and wearing on edge (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Rear coil spring corroded both (2.4.C.1b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Supplementary Restraint System warning lamp does not illuminate (5.4.2)
Supplementary Restraint System warning lamp does not illuminate (5.4.2)
airbag light is on
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nail in nearside rear tyre
How Reliable is the Peugeot Expert?
Based on 1,258,593 MOT tests across 97,542 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK04 JWC is a 2004 Peugeot Expert in Red with a 1,997cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 79.2%.
Across all 2004 Peugeot Expert models, the average MOT pass rate is 67.5% with a typical mileage of 105,744 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot Expert fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 34,152 recorded failures. If you're considering buying BK04 JWC, it's worth having these areas checked by a mechanic before committing.
The Peugeot Expert typically stays on UK roads for around 29 years. At 22 years old, this Peugeot Expert is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK04 JWC?
You can check the full history of BK04 JWC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK04 JWC registered?
BK04 JWC is a 2004 Peugeot Expert, first registered on 18 March 2004.
Is BK04 JWC safe to buy?
The MOT history for BK04 JWC shows 24 tests with a 79.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK04 JWC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK04 JWC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.