MOT Status
ExpiredMileage
63,099 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Brake pedal spongy (3.3.B.1b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Windscreen wiper does not clear the windscreen effectively x2 (8.2.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg holed, visible from under vehicle (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed, behind suspension leg area (2.4.A.3)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Suspension component mounting prescribed area is excessively corroded inner sill holed, multiple places (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded outer sill holed, multiple places (2.4.A.3)
Offside Front Macpherson strut has excessive movement at the upper attachment top mount (2.5.A.1c)
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded under floor area to inner sill holed, complete (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded middle inner sill holed (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded outer sill holed, multiple places (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Seat belt retracting mechanism defective 2nd row, 2nd seat, seat belt stuck (5.2.5b)
Seat belt retracting mechanism defective 3rd row, 1st seat, seat belts stuck (5.2.5b)
Service brake: efficiency below requirements (3.7.B.7)
windscreen has stone chip-1st row, n/s/r seat belt frayed-chassis legs corroded-rear panel corroded
all under vehicle covered by unknown substance-steering rack play-horn distorted
exhaust system corroded-rear panel corroded-front and rear chassis legs corroded
rear service and parking brake passed on limit-n/s/f tyre on limit
spare tyre worn low-abs rings corroded-wishbone bushes perished
x2 front link bushes perished-x2 inner and outter sills corroded
x2 rear leaf springs corroded-front and rear brakes juddering
x2 rear wheel bearings slight play-all inner arches corroded
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Brake pedal spongy (3.3.B.1b)
Horn not working (1.6.2a)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc outer cv boot (2.5.C.1a)
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg holed (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed, multiple places (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg holed, near n/s/r wheel (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill holed (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Suspension component mounting prescribed area is excessively corroded inner sill holed and inadequately repaired, complete (2.4.A.3)
Offside Front Body has a sharp edge caused by corrosion outer wheel arch (6.1.C.1)
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed, multiple places (2.4.A.3)
Offside Rear Direction indicator incorrect colour flashing white (1.4.A.2f)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg inadequately repaired (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded inner sill holed and inadequately repaired, complete (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded outer sill holed, front and rear (2.4.A.3)
Rear service and parking brake passed on limit
Suspension component mounting prescribed area repaired, but not inappropriately n/s inner sill complete - o/s outter sill complete - n/s outter sill complete - o/s inner sill complete (2.4.A.3)
Suspension component mounting prescribed area repaired, but not inappropriately x2 outter sills - x2 front chassis legs - x2 rear chassis legs (2.4.A.3)
all welding covered by thick substance unable to check properly
brake pedal spongy
front and rear brakes juddering-exhaust system corroded-under vehicle various areas of corrosion
horn slightly distorted-middle seat belt slightly sticking-
o/s/r first row second seatbelt slightly sticking-o/s/r second row seatbelt slightly sticking
rear panel corroded-front and rear chassis legs corroded-spare tyre worn low
steering rack play-all inner wheel arches corroded-n/s/f tyre on limit-x2 rear leaf springs corroded
x2 front drive shafts noisy -
x2 front link bushes perished-x2 inner and outer sills corroded-x2 rear wheel bearings have slight play
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Brake pedal spongy (3.3.B.1b)
Front Seat belt retracting mechanism defective middle belt stuck (5.2.5b)
Front Windscreen wiper does not clear the windscreen effectively x2 (8.2.2)
Horn not working (1.6.2a)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc outer cv boot (2.5.C.1a)
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg holed (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed, multiple places (2.4.A.3)
Nearside Rear Direction indicator incorrect colour flashing white (1.4.A.2f)
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg holed, near n/s/r wheel (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill holed (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Suspension component mounting prescribed area is excessively corroded inner sill holed and inadequately repaired, complete (2.4.A.3)
Offside Front Body has a sharp edge caused by corrosion outer wheel arch (6.1.C.1)
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed, multiple places (2.4.A.3)
Offside Rear Body has a sharp edge caused by corrosion outer wheel arch (6.1.C.1)
Offside Rear Direction indicator incorrect colour flashing white (1.4.A.2f)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg inadequately repaired (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded inner sill holed and inadequately repaired, complete (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded outer sill holed, front and rear (2.4.A.3)
Seat belt retracting mechanism defective 3rd row n/s/r seat belt (5.2.5b)
Seat belt retracting mechanism defective o/s/r 1st row, second seat belt (5.2.5b)
Seat belt retracting mechanism defective o/s/r 2nd row second seat belt (5.2.5b)
Rear service and parking brake passed on limit
front and rear brakes juddering-exhaust system corroded-under vehicle various areas of corrosion
rear panel corroded-front and rear chassis legs corroded-spare tyre worn low
steering rack play-all inner wheel arches corroded-n/s/f tyre on limit-x2 rear leaf springs corroded
x2 front link bushes perished-x2 inner and outer sills corroded-x2 rear wheel bearings have slight play
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has slight external damage to the casing (2.7.2a)
welding heavily undersealed amd painted
Nearside Front Headlamp aim too high and too far to the right. (1.8)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Seat belt retracting mechanism defective (5.2.5b)
Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has slight external damage to the casing (2.7.2a)
Brake servo vacuum pipe deteriorated (3.6.C.1b)
Centre Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Headlamp aim too high (1.8)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Front Headlamp aim too high (1.8)
Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (4.1.E.2a)
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Inner Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Rear fog lamp not working (1.3.2b)
Nearside Emergency exit sign missing (6.2.D.3)
Rear seats in poor condition
Vehicle presented in untidy condition
Rear seats in poor condition
Vehicle presented in untidy condition
Rear seats in poor condition
Vehicle presented in untidy condition
n/s inner drive shaft gator split
seat headrests in poor condition
rear o/s 2nd row headrests in poor condition
Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Seat belt cut causing the fibres to separate (5.1.B.3a)
Front Brake pad(s) wearing thin (3.5.1e)
offside rear bumper corner damaged and sticking out slightly,also off side,side panal damaged and sticking out slightly
How Reliable is the Citroen Relay?
Based on 1,209,729 MOT tests across 108,809 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK04 LDA is a 2004 Citroen Relay in Silver with a 2,800cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2004 Citroen Relay models, the average MOT pass rate is 64.2% with a typical mileage of 87,244 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Citroen Relay fails its MOT is parking brake: efficiency below requirements, accounting for 39,680 recorded failures. If you're considering buying BK04 LDA, it's worth having these areas checked by a mechanic before committing.
The Citroen Relay typically stays on UK roads for around 31 years. At 22 years old, this Citroen Relay is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK04 LDA?
You can check the full history of BK04 LDA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK04 LDA registered?
BK04 LDA is a 2004 Citroen Relay, first registered on 1 June 2004.
Is BK04 LDA safe to buy?
The MOT history for BK04 LDA shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK04 LDA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK04 LDA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.