2004 Honda Cr-v

Emissions unable to be completed (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Steering linkage ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Play in steering rack inner joint(s) ()

Offside Front Tyre slightly damaged (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Chassis has been undersealed

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill holed (5.3.6 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill holed (5.3.6 (a) (i))

both headlamp lens deteriorated-vehicle structure/chassis corroded-under vehicle/under vehicle components heavily corroded-rear axle corroded-inner and outer sills corroded-exhaust system corroded

inner wheel arches corroded-fuel tank cover corroded-rear anti roll bar corroded-rear panel corroded-o/s/r tyre on limit-spare wheel mounting area corroded

oil leak-prop shaft bushes perished and have slight play-brake pipes corroded/covered by substance-o/s/f + n/s/f inner cv boots deteriorated-o/s/f + n/s/f wishbone front bushes perished-front brake discs corroded and pitted

both headlamp lens deteriorated-vehicle structure/chassis corroded-slight oil leak-exhaust system corroded-central prop shaft bush perished and has slight play-under vehicle/components heavily corroded-both rear tyres perished and inner edges worn

brake pipes covered by substance unable to check properly-welding covered by substance unable to check properly-n/s/f tyre on limit

o/s/f tyre outer edge worn-o/s/f and n/s/f inner cv boots deteriorated-o/s/r inner wheel arch corroded/weak not within prescribed area-under vehicle covered by substance unable to check properly-

Front Position lamp not working (4.2.1 (a) (ii))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed, complete (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill holed (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed, complete (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed, complete (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill holed (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

both headlamp lens deteriorated-vehicle structure/chassis corroded-slight oil leak-exhaust system corroded-central prop shaft bush perished and has slight play-under vehicle/components heavily corroded-both rear tyres perished and inner edges worn

o/s/f tyre outer edge worn-o/s/f and n/s/f inner cv boots deteriorated

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Emissions not tested (8.2.1.2 (d))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Suspension arm pin or bush worn but not resulting in excessive movement front arm front bushes both sides (5.3.4 (a) (i))

Nearside Front All position lamps not working (4.2.1 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement front arm front bushes both sides (5.3.4 (a) (i))

Rear Brake pipe slightly corroded both sides to flexis corroded (3.6.B.2c)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Rear Brake pipe slightly corroded both sides to flexis corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

exhaust system corroded

Power steering pipe(s) or hose(s) has slight seepage suspect feed pipe leak (2.3.3b)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)