MOT Status
ExpiredMileage
330,124 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
general corrosion under body
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Central Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Engine Temperature Light Showing Fault
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Front Seat belt anchorage prescribed area strength or continuity significantly reduced n/s and o/s outer sill (7.1.1 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Brake pipe slightly corroded both rear and both front to rears (3.6.B.2c)
Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too low (1.8)
Brake pipe slightly corroded both rear and both front to rears (3.6.B.2c)
Brake pipe slightly corroded front to rears and both rears (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
brake pad warning light on
Nearside Front Upper Steering system excessively tight suspension top mounting siezed (2.2.D.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Upper Steering system excessively tight top suspension mounting siezed (2.2.D.1)
Offside Headlamp aim too low (1.8)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Brake pipe slightly corroded front to rears and both rears (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
brake pad warning light on
Nearside Rear Seat belt locking mechanism does not secure or release 3rd row (5.2.5a)
Offside Rear passenger door cannot be opened from outside the vehicle (6.2.B.1c)
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Brake cable has restricted free movement (3.5.1k)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Brake cable has restricted free movement (3.5.1k)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Headlamp aim too high (1.8)
Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Headlamp aim too low (1.8)
Offside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
os/f amd n/sf tyres outer edges feathering
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Stop lamp not working (1.2.1b)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
os/f amd n/sf tyres outer edges feathering
Offside Front position lamp(s) not working (1.1.A.3b)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
How Reliable is the Ford Galaxy?
Based on 2,683,070 MOT tests across 199,482 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK06 CNC is a 2006 Ford Galaxy in Grey with a 1,896cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 56.5%.
Across all 2006 Ford Galaxy models, the average MOT pass rate is 70.2% with a typical mileage of 99,344 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Galaxy fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 102,272 recorded failures. If you're considering buying BK06 CNC, it's worth having these areas checked by a mechanic before committing.
The Ford Galaxy typically stays on UK roads for around 31 years. At 20 years old, this Ford Galaxy is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK06 CNC?
You can check the full history of BK06 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK06 CNC registered?
BK06 CNC is a 2006 Ford Galaxy, first registered on 6 April 2006.
Is BK06 CNC safe to buy?
The MOT history for BK06 CNC shows 23 tests with a 56.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK06 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK06 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.