MOT Status
ValidMileage
108,409 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
inner/outersills corroded
underbody has been undersealed but still signs of corrosion
Nearside Rear Inner Suspension component mounting prescribed area fractured significantly reducing structural strength innersill (5.3.6 (a) (i))
Offside Front Side repeater not working (4.4.1 (a) (ii))
inner/outersills corroded
underbody has been undersealed but still signs of corrosion
Offside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))
under body coated in sealant (sill areas)
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Side repeater not working (4.4.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill and outer sill (6.1.1 (c) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Side repeater not working (4.4.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Inner Suspension component mounting prescribed area is corroded but not considered excessive Sills (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Floor (5.3.6 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Front Brake pipe corroded, covered in grease or other material near abs pump (1.1.11 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Items removed from driver's view prior to test
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear axle corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Emissions not tested (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Front All direction indicators not working (4.4.1 (a) (ii))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Position lamp not working side light (4.2.1 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Exhaust fumes causing a danger to health of persons on board (6.1.2 (b) (ii)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
FRONT INNER WHEEL ARCH COVERS FITTED
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))
FRONT INNER WHEEL ARCH COVERS FITTED
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Items removed from driver's view prior to test
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Items removed from driver's view prior to test
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Electronic power steering warning lamp indicates a system malfunction (2.6 (a))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Nearside Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Rear Brake pipe excessively corroded TO FRONT (1.1.11 (c))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Service brake excessively fluctuating (1.2.1 (e))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Items removed from driver's view prior to test
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
E M L LAMP ON
E M L LAMP ON
FRONT WHEEL ARCH COVERS FITTED
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Items removed from driver's view prior to test
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASS IS (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
SLIGHT CORROSION REAR AXLE
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)
E M L LAMP ON
E M L LAMP ON
FRONT WHEEL ARCH COVERS FITTED
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Items removed from driver's view prior to test
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASS IS (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (2.4.A.3)
SLIGHT CORROSION REAR AXLE
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too high (1.8)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Headlamp aim too high (1.8)
Rear Exhaust system not adequately supported (7.1.1)
Battery insecure (1.9.1)
Nearside Headlamp aim too high (1.8)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp aim too high (1.8)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
nearside rear tyre on limit & in poor condition.offside rear tyre close to limit.offside front tyre close to limit.nearside front tyre close to limit.
Front bumper insecure
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Rear bumper insecure
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK06 WXF is a 2006 Peugeot 107 in Silver with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying BK06 WXF, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK06 WXF?
You can check the full history of BK06 WXF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK06 WXF registered?
BK06 WXF is a 2006 Peugeot 107, first registered on 29 March 2006.
Is BK06 WXF safe to buy?
The MOT history for BK06 WXF shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK06 WXF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK06 WXF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.