MOT Status
ExpiredMileage
129,202 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system wiring damaged but not excessively (1.6 (d))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Anti-lock braking system wiring damaged but not excessively (1.6 (d))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Nail in tyre ()
Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Nail in tyre ()
Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Coil spring corroded front and rear (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
both wings repaired and cover with black sealant
underbody corrosion
Front Body panel corroded and likely to cause injury both wings have holes (6.2.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))
Coil spring corroded front and rear (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
underbody corrosion
front brake discs corroded and worn on inner face
front brake pads worn to excess
front tyres 75% worn
rear inner sills corroded
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement front trailing arm bush (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Central HEATER SHIELD INSECURE
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement front trailing arm bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced BOTH SIDES (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced BOTH SIDES (6.1.1 (c) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced BOTH SIDES (6.1.1 (c) (i))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced BOTH SIDES (6.1.1 (c) (i))
Items removed from driver's view prior to test
Offside front tyre on 3mm and wearing on inner shoulder 205/55/16 W
Front Brake pad(s) wearing thin (3.5.1g)
Nail in nearside front tyre
Nail in offside rear tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Nail in nearside front tyre
Nail in nearside rear tyre
Nail in offside rear tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Direction indicators incorrect colour (1.4.A.2f)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Direction indicators incorrect colour (1.4.A.2f)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
o/s/f tyre excessively worn on inner edge
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
nearside front and rear tyres wearing unevenly
Brake performance not tested (3.7.A.1)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
nearside front and rear tyres wearing unevenly
How Reliable is the Ford Focus?
Based on 28,316,889 MOT tests across 2,072,617 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK06 YDZ is a 2006 Ford Focus in Blue with a 1,596cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 72%.
Across all 2006 Ford Focus models, the average MOT pass rate is 74.0% with a typical mileage of 75,121 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,055,468 recorded failures. If you're considering buying BK06 YDZ, it's worth having these areas checked by a mechanic before committing.
The Ford Focus typically stays on UK roads for around 27 years. At 20 years old, this Ford Focus is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK06 YDZ?
You can check the full history of BK06 YDZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK06 YDZ registered?
BK06 YDZ is a 2006 Ford Focus, first registered on 2 June 2006.
Is BK06 YDZ safe to buy?
The MOT history for BK06 YDZ shows 25 tests with a 72% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK06 YDZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK06 YDZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.