MOT Status
ValidMileage
136,218 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
General underside corrosion
Nearside Front Lower Suspension arm pin or bush excessively worn Rear Bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn Rear Bush (5.3.4 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
General Under-side Corrosion
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Central Exhaust has a minor leak of exhaust gases exhaust joint (6.1.2 (a))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Rear Exhaust has a minor leak of exhaust gases exhaust joint (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
both front and rear subframs are corroded
Nearside Front Upper Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Front Upper Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
front and rear suspention is corroded
near side front brake is starting to bynde but ok on inbalance
near side rear tyre is worn low on tred and has nails in tred
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
front brake application uneven (3.7.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear rear brake binding (3.7.B.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear rear brake binding (3.7.B.1)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Anti-roll bar linkage insecure (2.4.G.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
both front brake discs are in poor condition on inner surfaces
rear brake discs are slightly coated in surface rust
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
both front brake discs are in poor condition on inner surfaces
rear brake discs are slightly coated in surface rust
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar linkage insecure (2.4.G.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK06 ZMX is a 2006 Mazda MX-5 in Grey with a 1,999cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2006 Mazda MX-5 models, the average MOT pass rate is 77.9% with a typical mileage of 54,492 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying BK06 ZMX, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 20 years old, this Mazda MX-5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK06 ZMX?
You can check the full history of BK06 ZMX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK06 ZMX registered?
BK06 ZMX is a 2006 Mazda MX-5, first registered on 27 March 2006.
Is BK06 ZMX safe to buy?
The MOT history for BK06 ZMX shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK06 ZMX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK06 ZMX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.