MOT Status
ExpiredMileage
159,495 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar linkage ball joint dust cover severely deteriorated both (5.3.4 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
light corrosion to underside
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Anti-roll bar linkage ball joint dust cover severely deteriorated both (5.3.4 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
light corrosion to underside
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
various areas of corrosion to underside
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Headlamp lens slightly defective both (4.1.1 (b) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Shock absorbers has negligible damping effect (5.3.2 (d))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Headlamp lens slightly defective both (4.1.1 (b) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened s (1.1.14 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Central Stop lamp not working (1.2.1b)
Offside Stop lamp not working (1.2.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Central Stop lamp not working (1.2.1b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Registration plate lamp not illuminating the registration plate both (1.1.C.1e)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nail in offside rear tyre
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK08 YDJ is a 2008 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BK08 YDJ, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK08 YDJ?
You can check the full history of BK08 YDJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK08 YDJ registered?
BK08 YDJ is a 2008 Mazda 3, first registered on 26 March 2008.
Is BK08 YDJ safe to buy?
The MOT history for BK08 YDJ shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK08 YDJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK08 YDJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.