MOT Status
ExpiredMileage
128,928 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
exhaust shield slightly insecure
Central Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Central Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Central Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Central Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light lense cracked (4.3.1 (b) (i))
Central Front engine sump corroded around base
Nearside Rear Upper Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Outer Headlamp lens slightly defective lense cracked (4.1.1 (b) (i))
Offside Rear Upper Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Brake hose has slight corrosion to ferrules O/S/R & N/S/R (3.6.B.4e)
Front registration plate damaged
Offside Rear body & lamp unit damaged
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brake hose has slight corrosion to ferrules O/S/R & N/S/R (3.6.B.4e)
Front registration plate damaged
Offside Rear body & lamp unit damaged
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
n/s/f inner drive shaft boot split
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK08 YOE is a 2008 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 72.2%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BK08 YOE, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK08 YOE?
You can check the full history of BK08 YOE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK08 YOE registered?
BK08 YOE is a 2008 Mazda 3, first registered on 26 March 2008.
Is BK08 YOE safe to buy?
The MOT history for BK08 YOE shows 18 tests with a 72.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK08 YOE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK08 YOE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.