MOT Status
ValidMileage
130,056 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Suspension components corroded
Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
under trays fitted
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Windscreen wiper does not clear the windscreen effectively both fronts (3.4 (b) (ii))
Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
under trays fitted
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement & offside front (2.4.G.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
front brake pads 70% worn
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK08 YTG is a 2008 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 80%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BK08 YTG, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK08 YTG?
You can check the full history of BK08 YTG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK08 YTG registered?
BK08 YTG is a 2008 Mazda 3, first registered on 26 March 2008.
Is BK08 YTG safe to buy?
The MOT history for BK08 YTG shows 20 tests with a 80% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK08 YTG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK08 YTG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.