MOT Status
ExpiredMileage
132,778 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
rear suspension components corroded
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
rear suspension components corroded
Nearside Front Lower Suspension arm pin or bush excessively worn rear bush excessively worn (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Both front headlights starting to mist. Not affecting aim at this time
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
front number plate deteriorated
rear washer not working
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
front number plate deteriorated
rear washer not working
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK08 YYG is a 2008 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BK08 YYG, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK08 YYG?
You can check the full history of BK08 YYG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK08 YYG registered?
BK08 YYG is a 2008 Mazda 3, first registered on 26 March 2008.
Is BK08 YYG safe to buy?
The MOT history for BK08 YYG shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK08 YYG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK08 YYG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.