MOT Status
ExpiredMileage
106,545 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Outer sill is corroded under door
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
rear shock absorbers is corroded (both sides)
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
rear shock absorbers is corroded (both sides)
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Service brake grabbing severely (1.2.1 (c))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive and rear (5.3.6 (a) (i))
rear shock absorber structure is corroded (both sides)
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Exhaust system insecure (6.1.2 (a))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Service brake grabbing severely (1.2.1 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Exhaust silencer insecure (8.1.1 (b) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Brake pad(s) less than 1.5 mm thick both sides (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive and rear (5.3.6 (a) (i))
rear shock absorber structure is corroded (both sides)
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake performance not tested (1.2.1 (g))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Exhaust system insecure (6.1.2 (a))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Exhaust system insecure (6.1.2 (a))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Road wheel badly distorted (5.2.2 (c) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Exhaust has a major leak of exhaust gases Silencer (6.1.2 (a))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear tyre getting low on tread
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK08 ZPF is a 2008 Peugeot 107 in Silver with a 998cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2008 Peugeot 107 models, the average MOT pass rate is 74.1% with a typical mileage of 54,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying BK08 ZPF, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 18 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BK08 ZPF?
You can check the full history of BK08 ZPF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK08 ZPF registered?
BK08 ZPF is a 2008 Peugeot 107, first registered on 31 March 2008.
Is BK08 ZPF safe to buy?
The MOT history for BK08 ZPF shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK08 ZPF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK08 ZPF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.