2010 Ford Fusion

Brake disc worn, pitted or scored, but not seriously weakened Both front discs (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate deteriorated but not likely to be misread Both plates (0.1 (b))

Brake disc worn, but not excessively Both front (1.1.14 (a) (i))

Corrosion to underside of body and components

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Direction indicator incorrect colour Showing white light (4.4.3 (a))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Brake disc worn, but not excessively Both front (1.1.14 (a) (i))

Corrosion to underside of body and components

Front Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive upper spring seats (5.3.6 (a) (i))

Suspension component corroded but not seriously weakened all suspension corroded front and rear (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened Related suspension corroded also (5.3.3 (b) (i))

Offside Front Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm ball joint dust cover severely deteriorated Both front lower ball joints (5.3.4 (b) (i))

Suspension component corroded but not seriously weakened Rear axle (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Rear spring mounts (5.3.6 (a) (i))

Brake performance unable to be tested Due to leaking hydraulic system (1.2.1 (g))

Nearside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Nearside Rear Brake pipe leaking on a hydraulic braking system Next to fuel tank (1.1.11 (b) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened Related suspension corroded also (5.3.3 (b) (i))

Offside Front Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm ball joint dust cover severely deteriorated Both front lower ball joints (5.3.4 (b) (i))

Suspension component corroded but not seriously weakened Rear axle (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Rear spring mounts (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material pipe by fuel tank (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Offside Front Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Close to limit and worn on edges (O/S/R tyre 3-4mm) (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge Close to limit and worn on edges (O/S/R tyre 3-4mm) (5.2.3 (e))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material before tank (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Emissions not tested (7.4.B.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has a major leak of exhaust gases rear box (7.1.2)

Nearside Rear Tyre worn close to the legal limit 2-3mm (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt