MOT Status
ValidMileage
108,652 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge Tyre worn to 3mm (5.2.3 (e))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Tyre worn close to legal limit/worn on edge Tyre wearing outer edge and damaged outer sidewall (5.2.3 (e))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a major leak of exhaust gases From mid section (6.1.2 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge Tyre worn to 3mm (5.2.3 (e))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Tyre worn close to legal limit/worn on edge Tyre wearing outer edge and damaged outer sidewall (5.2.3 (e))
Emissions unable to be completed ((EML)) (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Reversing lamp inoperative (4.6.1 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 3mm worn on inner edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge 3mm worn on inner edge (5.2.3 (e))
engine covers & under trays fitted
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge 3mm worn on inner edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge 3mm worn on inner edge (5.2.3 (e))
engine covers & under trays fitted
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake lining(s) wearing thin (1.1.13 (a) (ii))
Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Front Outer Brake lining(s) incorrectly mounted (1.1.13 (c)) DANGEROUS
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake lining(s) wearing thin (1.1.13 (a) (ii))
Rear Service brake binding but not excessively (1.2.1 (f))
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front registration plate deteriorated (6.3.1d)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Horn not working (1.6.2a)
Offside Rear Rear fog lamp not working (1.3.2b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Side repeater not working (1.4.A.2c)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Headlamp aim too low (1.8)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nail in offside front tyre
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK10 VVS is a 2010 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2010 Mazda 3 models, the average MOT pass rate is 77.7% with a typical mileage of 68,318 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BK10 VVS, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 16 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK10 VVS?
You can check the full history of BK10 VVS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK10 VVS registered?
BK10 VVS is a 2010 Mazda 3, first registered on 14 April 2010.
Is BK10 VVS safe to buy?
The MOT history for BK10 VVS shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK10 VVS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK10 VVS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.