MOT Status
ExpiredMileage
174,455 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
engine cover fitted preventing thorough inspection of vehicle components
undertrays fitted preventing thorough inspection of under vehicle components
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Sidewall (5.2.3 (d) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
engine cover fitted preventing thorough inspection of vehicle components
undertrays fitted preventing thorough inspection of under vehicle components
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
slight rear underbody corrosion
undertrays fitted obscuring some underside components
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))
nearside rear inner seal slightly corroded
offside rear inner seal slightly corroded
undertrays fitted obscuring some underside components
Front Brake pad(s) wearing thin both o/s + n/s strong advise. (3.5.1g)
Front Brake pipe slightly corroded both o/s + n/s (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit strong advise. (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened both o/s + n/s strong advise. (3.5.1i)
Rear it would appear that brake system requires svrvice or adjustment.
corrosion to suspension components
Central Rear Seat belt installation in such a position that loading the belt causes the cushion to be raised or significantly compressed, allowing the occupant to effectively move forward (5.3.1l)
Nearside Front Outer Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin both o/s + n/s strong advise. (3.5.1g)
Front Brake pipe slightly corroded both o/s + n/s (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit strong advise. (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened both o/s + n/s strong advise. (3.5.1i)
Rear it would appear that brake system requires svrvice or adjustment.
corrosion to suspension components
Offside Rear child seat fitted preventing complete inspection of an adult seat belt.
under trays fitted preventing through inspection of under vehicle components.
Centre Stop lamp not working (1.2.1b)
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK10 WFG is a 2010 Mazda 6 in Black with a 2,183cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2010 Mazda 6 models, the average MOT pass rate is 76.5% with a typical mileage of 86,657 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying BK10 WFG, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 16 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK10 WFG?
You can check the full history of BK10 WFG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK10 WFG registered?
BK10 WFG is a 2010 Mazda 6, first registered on 1 June 2010.
Is BK10 WFG safe to buy?
The MOT history for BK10 WFG shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK10 WFG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK10 WFG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.