MOT Status
ExpiredMileage
75,796 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)
Offside Inner Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Outer Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded center (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
oil leak
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt anchorage prescribed area is excessively corroded centre floor (5.2.6)
oil leak
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Inner Tyre worn close to the legal limit (4.1.E.1)
Offside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Inner Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Inner Tyre worn close to the legal limit (4.1.E.1)
Offside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Inner Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
n/s front tyre worn outer edge
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
n/s front tyre worn outer edge
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Headlamp not working on main beam (1.7.5a)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front brake disc slightly pitted (3.5.1h)
rear number plate damaged
Front brake disc slightly pitted (3.5.1h)
Nearside Registration plate lamp not working (1.1.5c)
Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)
rear number plate damaged
Front and rear shock mountings have considerable movement when jacked up
Nearside Headlamp aim too low (1.8)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Front and rear shock mountings have considerable movement when jacked up
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BK52 HBU is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BK52 HBU, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BK52 HBU?
You can check the full history of BK52 HBU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BK52 HBU registered?
BK52 HBU is a 2003 Ford Ka, first registered on 16 January 2003.
Is BK52 HBU safe to buy?
The MOT history for BK52 HBU shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BK52 HBU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BK52 HBU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.