2003 Peugeot 206

Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Tyre worn close to legal limit/worn on edge both front tyres wearing thin on outer edge (5.2.3 (e))

Fuel tank insecure tank strap rotted through (6.1.3 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both front tyres wearing thin on outer edge (5.2.3 (e))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Items removed from driver's view prior to test ()

Front Brake disc worn, pitted or scored, but not seriously weakened discs are corroded on edges (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Items removed from driver's view prior to test ()

Offside Front Tyre worn close to legal limit/worn on edge wearing thin on edge (5.2.3 (e))

Rear Tyre slightly damaged/cracking or perishing Both rear tyres are perishing on treads, especially nearside (5.2.3 (d) (ii))

slight blow from clamp on rear exhaust box

Front Brake disc worn, pitted or scored, but not seriously weakened discs are corroded on edges (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Items removed from driver's view prior to test ()

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge wearing thin on edge (5.2.3 (e))

Offside Side repeater incorrect colour (4.4.3 (a))

Rear Tyre slightly damaged/cracking or perishing Both rear tyres are perishing on treads, especially nearside (5.2.3 (d) (ii))

slight blow from clamp on rear exhaust box

Brake load sensing valve linkage defective and function impaired leaking (1.1.17 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Registration plate lamp not working (1.1.C.1d)

Nearside Registration plate lamp not working (1.1.C.1d)

Emissions not tested (7.3.A.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel tank secondary support strap corroded & weak.

Brake load sensing valve seized (3.6.E.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in offside rear tyre

Front Tyre worn close to the legal limit (4.1.E.1)