2004 Ford Transit

Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch to sill (7.1.1 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by leafspring bushes - both sides (5.3.6 (a) (i))

Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i))

Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength leafspring box section (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple chassis places front to rear (5.3.6 (a) (i))

heavy corrosion underside vehicle

oil leak

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

chip in zone a

Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills (5.2.6)

Nearside Front Suspension component mounting prescribed area is excessively corroded chassis and inner w/arch (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sills (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner w/arch (2.4.A.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis and inner w/arch (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis under bonnet (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sills (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner w/arch (2.4.A.3)

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (1.1.C.1a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis several places (2.4.A.3) DANGEROUS

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis several places (2.4.A.3) DANGEROUS

Oil leak ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

slight blow on exhaust

Front Brake pipe slightly corroded both sides,n/s/f,o/s/f (3.6.B.2c)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both sides ,rear bushes,may require to attention (2.4.G.2)

Nearside Front Seat belt stitching slightly frayed (5.2.2b)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

anti-slip brake pedal slightly wearing worn

both sill panel,outer and inner have slightly corroded,may require to attention

Nearside Front Steering arm has relative movement at its fixings (2.2.B.1h)

Offside Front Headlamp insecure (1.7.3)

Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings two section (6.1.B.2)

Front Brake pipe slightly corroded both sides,n/s/f,o/s/f (3.6.B.2c)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both sides ,rear bushes,may require to attention (2.4.G.2)

Nearside Front Seat belt stitching slightly frayed (5.2.2b)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

anti-slip brake pedal slightly wearing worn

both sill panel,outer and inner have slightly corroded,may require to attention

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Play in steering rack inner joint(s)

Body has slight corrosion (6.1.B.2)

Engine covers fitted obscuring some components in the engine bay

Play in steering rack inner joint(s)

Rear All position lamps slightly affected by the operation of another lamp (1.1.A.3f)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

off side rear bumper loose but not insecure

Fuel system component leaking (7.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Wheel nut(s) loose (4.2.A.1e)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Body has slight corrosion (6.1.B.2)

Engine covers fitted obscuring some components in the engine bay

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Play in steering rack inner joint(s)

Rear All position lamps slightly affected by the operation of another lamp (1.1.A.3f)

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

off side rear bumper loose but not insecure

all brake pipes lightly corrodded

corrossion in and outside prescribed areas not holed as yet

offside rear tyre wearing uneven

offsidefront tyre wearing on inner edge

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

all brake pipes lightly corrodded

corrossion in and outside prescribed areas not holed as yet

offside rear tyre wearing uneven

offsidefront tyre wearing on inner edge

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

corrossion in and outside prescribed areas not holed as yet

offside rear tyre wearing uneven

Horn not working (1.6.2a)

Nearside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Registration plate lamp not working (1.1.C.1d)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

corrossion in and outside prescribed areas not holed as yet

offside rear tyre wearing uneven

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Rear Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)