2005 Peugeot 206

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Exhaust system not adequately supported (7.1.1)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Electrical wiring inadequately supported (1.9.2a)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both rear tyres badly cracked and perished

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both rear tyres badly cracked and perished

rear exhaust corroded badly

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Registration plate lamp not working (1.1.C.1d)

front discs badly corroded and worn

front windows tinted not suitable for road use reccommed remove

o/s/r tyre perished

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

front discs badly corroded and worn

front windows tinted not suitable for road use reccommed remove

o/s/r tyre perished

all 4 tyre valves heavily perished

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp insecure (1.7.3)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

all 4 tyre valves heavily perished

Front Brake pad(s) wearing thin (3.5.1g)

both front tyres very close to legal limit

o/s/f wheel arch smashed

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

both front tyres very close to legal limit

o/s/f wheel arch smashed