2006 Mercedes-benz Vito

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill, near the jacking point. (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sills, front of wheel arch, jacking point. (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

parking brake only just met requirements.

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner sills, rear of wheel arch, jacking point. (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sills, front of wheel arch, jacking point. (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Central Front seat belt external buckle casing damaged but operating as intended

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake lamp casing slightly cracked on the edge. Lamp operates as intended

Nearside Rear Brake pipe corroded, covered in grease or other material Brake pipe corroded very so slightly. Clean up and paint to avoid future problems (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Play in steering rack inner joint(s) Minimal play detected ()

Offside Rear Brake pipe corroded, covered in grease or other material Brake pipe corroded very so slightly. Clean up and paint to avoid future problems (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Oil leak, but not excessive differential is misting/ leaking oil (8.4.1 (a) (i))

Oil leak, but not excessive top of the rocker cover (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Reverse light does not work ( not testable before 2009 vehicles)

Windscreen wiper blade defective (3.4 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive by jacking point (5.3.6 (a) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive by jacking point (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Park brake release handle broken still operational .

Electronic stability control switch not functioning correctly (7.12 (d))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive by jacking point (5.3.6 (a) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive by jacking point (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Park brake release handle broken still operational .

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))

Central Exhaust has a major leak of exhaust gases box (6.1.2 (a))

Electronic stability control switch not functioning correctly (7.12 (d))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Electronic stability control warning lamp not working (7.12 (e))

Play in steering rack inner joint(s) ()

bonnet difficult to open

engine oil low level

front direction indicators faded

Nearside Headlamp aim too low (1.8)

Play in steering rack inner joint(s) ()

bonnet difficult to open

engine oil low level

front direction indicators faded

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Direction indicator slightly discoloured both (1.4.A.2f)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement d/ bush (2.4.G.2)

Offside Rear nail

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Direction indicator slightly discoloured both (1.4.A.2f)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement d/ bush (2.4.G.2)

Offside Rear nail

Direction indicator slightly discoloured (1.4.A.2f)

Nail in offside rear tyre

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Nearside Rear coil spring fractured (2.4.C.1a)

Nearside Headlamp aim too far to the left (1.8)

Nail in nearside front tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too high (1.8)