MOT Status
ExpiredMileage
95,291 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Tyre worn close to the legal limit (4.1.E.1)
nearside front of outer sill corroded
Front Steering system excessively rough (2.2.D.1)
Nearside Front Brake hose twisted (3.6.B.4c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front coil spring fractured (2.4.C.1a)
Offside Fuel tank insecure (7.2.1)
Offside Headlamp aim too low (1.8)
Side repeater incorrect colour (1.4.A.2f)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Tyre worn close to the legal limit (4.1.E.1)
nearside front of outer sill corroded
Exhaust has a minor leak of exhaust gases (7.1.2)
Front exhaust pipe flex deteriorated
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Nearside front sill holed outside prescribed area
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front coil spring corroded (2.4.C.1b)
Offside Side repeater slightly discoloured (1.4.A.2f)
Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)
Wiper blades starting to smear windscreen
Nearside Brake pipe inadequately clipped (3.6.B.1)
Nearside Headlamp aim too high (1.8)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Brake pipe inadequately clipped (3.6.B.1)
Offside Headlamp aim too high (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front exhaust pipe flex deteriorated
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Nearside front sill holed outside prescribed area
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front coil spring corroded (2.4.C.1b)
Offside Side repeater slightly discoloured (1.4.A.2f)
Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Wiper blades not checked due to no water in bottle
Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)
n/s front sill holed but not near any structural part
Brake load sensing valve linkage defective and function impaired (3.6.E.3)
Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pedal actuating linkage excessively corroded and seriously weakened (3.3.A.1g)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)
n/s front sill holed but not near any structural part
slight bind n/s rear brake
Brake load sensing valve linkage defective and function impaired (3.6.E.3)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Lower Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Upper Brake pipe excessively corroded (3.6.B.2c)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Brake load sensing valve inoperative (3.6.E.3) DANGEROUS
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS
Offside Rear rear brake binding (3.7.B.1) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Centre Rear Body has slight corrosion (6.1.B.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
fuel tank straps corrosion evident
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
fuel tank straps corrosion evident
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
Front brake disc slightly pitted (3.5.1h)
Offside Rear Torque/reaction arm has a slightly deteriorated synthetic bush (2.4.G.2)
Exhaust system not adequately supported (7.1.1)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Front brake disc slightly pitted (3.5.1h)
Offside Rear Torque/reaction arm has a slightly deteriorated synthetic bush (2.4.G.2)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside rear brake binding (3.7.B.1)
Nearside Front Lower Ball joint has slight play (2.2.B.1f)
Nearside Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL02 FMO is a 2002 Peugeot 206 in Green with a 1,997cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BL02 FMO, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL02 FMO?
You can check the full history of BL02 FMO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL02 FMO registered?
BL02 FMO is a 2002 Peugeot 206, first registered on 25 June 2002.
Is BL02 FMO safe to buy?
The MOT history for BL02 FMO shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL02 FMO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL02 FMO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.