MOT Status
ExpiredMileage
158,950 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside front upper strut assembly stiff
Both upper strut mounts stiff
Brake load sensing valve stiff (1.1.17 (c) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Both upper strut mounts stiff
Brake load sensing valve stiff (1.1.17 (c) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Brake load sensing valve linkage defective and function impaired (1.1.17 (a))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Exhaust system insecure (6.1.2 (a))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Offside Rear Suspension arm has slight play in a pin/bearing (2.4.G.2)
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Offside Rear Suspension arm has slight play in a pin/bearing (2.4.G.2)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Brake load sensing valve linkage stiff (3.6.E.3)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Brake load sensing valve linkage stiff (3.6.E.3)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake load sensing valve linkage seized (3.6.E.3)
Offside Headlamp aim too high (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Small chips in windscreen
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Brake load sensing valve stiff (3.6.E.3)
Nail in offside rear tyre
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Small chips in windscreen
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake load sensing valve linkage seized (3.6.E.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Noise from engine
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside front tyre worn on inner stepped edge
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Side repeater incorrect colour (1.4.A.2f)
Noise from engine
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside front tyre worn on inner stepped edge
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Indicator switch faulty (1.4.A.1)
Nearside Registration plate lamp not working (1.1.5c)
Offside Registration plate lamp insecure (1.1.C.1c)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL02 MLV is a 2002 Peugeot 206 in Silver with a 1,997cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 57.1%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BL02 MLV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL02 MLV?
You can check the full history of BL02 MLV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL02 MLV registered?
BL02 MLV is a 2002 Peugeot 206, first registered on 26 June 2002.
Is BL02 MLV safe to buy?
The MOT history for BL02 MLV shows 28 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL02 MLV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL02 MLV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.