MOT Status
ExpiredMileage
83,884 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust emissions likely to be affected by an exhaust leak hole at back box marked yellow (8.2.2.1 (b))
Exhaust emissions likely to be affected by an exhaust leak hole next to sensor marked yellow (8.2.2.1 (b))
Offside Rear Suspension arm pin or bush excessively worn radius arm (5.3.4 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Stop lamp(s) all not working brake switch appears faulty (4.3.1 (a) (iii)) DANGEROUS
Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Position lamp not working corrected on test (4.2.1 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, but not excessively both sides (1.1.14 (a) (i))
Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))
Rear Exhaust mounting defective bracket (6.1.2 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a major leak of exhaust gases Insecure and corroded (6.1.2 (a))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Front Direction indicator incorrect colour (4.4.3 (a))
Offside Rear Suspension arm pin or bush excessively worn Axle bush (5.3.4 (a) (i))
Offside Side repeater incorrect colour (4.4.3 (a))
Offside Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii))
Rear Registration plate inscription illegible (0.1 (b))
Rear fog lamp not working (4.5.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
Anti-lock braking system component excessively damaged n/s/f abs ring (3.4.2)
Anti-lock braking system component excessively damaged o/s/f abs ring (3.4.2)
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Emissions not tested (7.3.A.1)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Horn not working (1.6.2a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Both rear tyres ageing
Child seat fitted not allowing full inspection of adult belt
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear exhaust rubbers worn but still adequately supported
Emissions not tested (7.0)
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)
Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Child seat fitted not allowing full inspection of adult belt
Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Air bag lamp illuminated.
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Air bag lamp illuminated.
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.5c)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear brake disc excessively pitted (3.5.1h)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL02 NYG is a 2002 Peugeot 206 in Silver with a 1,997cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BL02 NYG, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL02 NYG?
You can check the full history of BL02 NYG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL02 NYG registered?
BL02 NYG is a 2002 Peugeot 206, first registered on 28 June 2002.
Is BL02 NYG safe to buy?
The MOT history for BL02 NYG shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL02 NYG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL02 NYG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.