2003 Honda Cr-v

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

REAR UNDER BODY LIGHTLY CORRODED

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Seat belt installation anchorage insecure (10.1 (d))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

REAR UNDER BODY LIGHTLY CORRODED

Exhaust has a minor leak of exhaust gases joints (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension component mounting prescribed area is corroded but not considered excessive front subframe mounting area (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive rear shocks prescribed areas (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Stop lamp(s) not working And high level stop lamp (4.3.1 (a) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases joints (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension component mounting prescribed area is corroded but not considered excessive front subframe mounting area (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive rear shocks prescribed areas (5.3.6 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Registration plate insecure (0.1 (a))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake pad(s) wearing thin (1.1.13 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear lamp lense damaged

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated pin hole (6.1.7 (g) (i))

Rear Exhaust mounting defective section support bracket missing (6.1.2 (a))

Position lamp not working (4.2.1 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Windscreen washer not working (3.5 (a))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Offside Front Windscreen washer not working (3.5 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Vehicle structure has slight corrosion (6.1.B.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Outer Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar linkage fractured (2.4.G.1)

Offside Front Anti-roll bar linkage cracked (2.4.G.1)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Offside Headlamp aim too high (1.8)

o/s/f tyre wearing on inner edge