MOT Status
ExpiredMileage
85,726 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Front Front wheel bearing rough when rotated (2.5.A.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Vehicle structure has slight corrosion (6.1.B.2)
Vehicle structure has slight corrosion (6.1.B.2)
offside front brake slightly binding.
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
corrosion near o/s engine mount
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
corrosion near o/s engine mount
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nail in nearside rear tyre
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
n/s/f brake disc outer surface corroded
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nail in nearside rear tyre
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
n/s/f brake disc outer surface corroded
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Front Headlamp aim too high (1.8)
Front Headlamp aim too high (1.8)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL03 FZA is a 2003 Mazda 323 in Grey with a 1,598cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying BL03 FZA, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BL03 FZA?
You can check the full history of BL03 FZA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL03 FZA registered?
BL03 FZA is a 2003 Mazda 323, first registered on 30 June 2003.
Is BL03 FZA safe to buy?
The MOT history for BL03 FZA shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL03 FZA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL03 FZA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.