MOT Status
ExpiredMileage
283,994 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))
Nearside Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Engine bay/brake servo (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced Engine bay (6.1.1 (c) (i))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both bushes (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both bushes (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Windscreen washer not working (3.5 (a))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps Both (4.7.2 (a))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced Engine bay (6.1.1 (c) (i))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both bushes (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both bushes (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Body has slight corrosion (6.1.B.2)
Nearside Front Brake pipe slightly corroded Front to rear (3.6.B.2c)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Rear Body has slight corrosion (6.1.B.2)
Brake fluid warning lamp illuminated (3.6.G.2)
Brake load sensing valve seized (3.6.E.3)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear corner (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings In front of rear wheel (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear corner (6.1.B.2)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Body has slight corrosion (6.1.B.2)
Nearside Front Brake pipe slightly corroded Front to rear (3.6.B.2c)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Parking brake lever has little reserve travel (3.1.6b)
Rear Body has slight corrosion (6.1.B.2)
Central Front Brake pipe slightly corroded near side (3.6.B.2c)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Inner Brake pipe slightly corroded x2 on chassis rail (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake hose excessively deteriorated (3.6.B.4d)
Nearside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)
Service brake: efficiency below requirements (3.7.B.7)
Central Front Brake pipe slightly corroded near side (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Inner Brake pipe slightly corroded x2 on chassis rail (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside vehicle body corroded outside of prescribed area
Vehicle structure has slight corrosion (6.1.A.1)
Battery insecure (1.9.1)
Brake load sensing valve seized (3.6.E.3)
Brake pipe excessively corroded Load valve to offside rear (3.6.B.2c)
Centre Brake pipe excessively corroded (3.6.B.2c)
Nearside Brake cable has wires broken and is significantly weakened (3.5.1b)
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor pan (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch (6.1.B.2)
Nearside front brake binding (3.7.B.1)
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Floor pan (6.1.B.2)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside vehicle body corroded outside of prescribed area
Vehicle structure has slight corrosion (6.1.A.1)
Body has slight corrosion (6.1.B.2)
Brake load sensing valve linkage stiff (3.6.E.3)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Coolant leak
Fuel tank straps corroded
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Oil leak
Steering system slightly rough (2.2.D.1)
Vehicle structure has slight corrosion (6.1.A.1)
Brake fluid warning lamp illuminated (3.6.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Horn not working (1.6.2a)
Offside Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Body has slight corrosion (6.1.B.2)
Brake load sensing valve linkage stiff (3.6.E.3)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Coolant leak
Fuel tank straps corroded
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Oil leak
Steering system slightly rough (2.2.D.1)
Vehicle structure has slight corrosion (6.1.A.1)
All leaf spring attachment brackets slightly corroded
Brake load sensing valve linkage stiff (3.6.E.3)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Rear wheel bearing has slight play (2.6.2)
Nearside wiper split
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Battery insecure (1.9.1)
Centre Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front An item not tested (Manual)
Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Nearside Front front brake binding (3.7.B.1)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Brake cable has wires broken and is significantly weakened (3.5.1b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
All leaf spring attachment brackets slightly corroded
Brake load sensing valve linkage stiff (3.6.E.3)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Rear wheel bearing has slight play (2.6.2)
Nearside wiper split
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement (2.4.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Centre Brake pipe slightly corroded (3.6.B.2c)
Exhaust system slightly deteriorated
Rear Brake pad(s) wearing thin (3.5.1g)
Washer operation weak
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Brake pipe slightly corroded (3.6.B.2c)
Centre Brake pipe slightly corroded (3.6.B.2c)
Exhaust system slightly deteriorated
Rear Brake pad(s) wearing thin (3.5.1g)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Washer operation weak
Bonnet catch stiff
Centre Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Brake load sensing valve linkage seized (3.6.E.3)
Brake pedal spongy (3.3.B.1b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b) DANGEROUS
Bonnet catch stiff
Centre Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Headlamp insecure (1.7.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake pedal creeps down when held under pressure (3.3.B.1a)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Braking system leaking (3.6.A.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Rear Direction indicator not working (1.4.A.2c)
Nearside Registration plate lamp not working (1.1.5c)
Offside Registration plate lamp not working (1.1.5c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)
Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Stop lamp not working (1.2.1b)
Rear Registration plate lamp not working (1.1.5c)
How Reliable is the Iveco Daily?
Based on 817,098 MOT tests across 76,231 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL03 OTW is a 2003 Iveco Daily in White with a 2,287cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 50%.
Across all 2003 Iveco Daily models, the average MOT pass rate is 63.8% with a typical mileage of 107,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Iveco Daily fails its MOT is parking brake: efficiency below requirements, accounting for 54,319 recorded failures. If you're considering buying BL03 OTW, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily typically stays on UK roads for around 30 years. At 23 years old, this Iveco Daily is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BL03 OTW?
You can check the full history of BL03 OTW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL03 OTW registered?
BL03 OTW is a 2003 Iveco Daily, first registered on 30 July 2003.
Is BL03 OTW safe to buy?
The MOT history for BL03 OTW shows 28 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL03 OTW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL03 OTW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.