MOT Status
ExpiredMileage
197,009 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake disc worn, but not excessively rusty (1.1.14 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))
Parking brake lever worn, but not excessively (1.1.6 (b) (i))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive sills (7.1.1 (a) (i))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm pin or bush worn but not resulting in excessive movement various (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front passenger door cannot be opened from outside the vehicle (6.2.3 (a))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Suspension system inoperative (5.3.5 (a)) DANGEROUS
Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive sills (7.1.1 (a) (i))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm pin or bush worn but not resulting in excessive movement various (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Position lamp not working n/s+o/s (4.2.1 (a))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Suspension system inoperative (5.3.5 (a)) DANGEROUS
Brake pipe corroded, covered in grease or other material some pipes not visable (1.1.11 (c))
Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))
suspension components corroded
Nearside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
underside slightly corroded.
Nearside Rear Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Rear Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
all brake pipes coverd
slight play in n/s/r lower bush
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Rear Sub-frame synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Centre Stop lamp not working (1.2.1b)
Nearside Front Steering system lock to lock check exposes a seriously damaged brake hose (2.2.D.2b)
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
o/s and n/s front ABS sensor wires and brake pad wear indicator wiring are worn and damaged slightly due to contact with the inner tyre sidewalls .
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc slightly scored (3.5.1h)
offside exterior mirror backing insucure
rear number plate fading
Offside Front Brake pipe slightly corroded (3.6.B.2c)
n/s front brake slightly binding advise repair
How Reliable is the Land Rover Range Rover?
Based on 2,072,334 MOT tests across 178,266 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL03 PER is a 2003 Land Rover Range Rover in Green with a 2,926cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2003 Land Rover Range Rover models, the average MOT pass rate is 76.0% with a typical mileage of 99,099 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Land Rover Range Rover fails its MOT is brake pipe excessively corroded, accounting for 63,439 recorded failures. If you're considering buying BL03 PER, it's worth having these areas checked by a mechanic before committing.
The Land Rover Range Rover typically stays on UK roads for around 39 years. At 23 years old, this Land Rover Range Rover is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BL03 PER?
You can check the full history of BL03 PER by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL03 PER registered?
BL03 PER is a 2003 Land Rover Range Rover, first registered on 7 June 2003.
Is BL03 PER safe to buy?
The MOT history for BL03 PER shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL03 PER have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL03 PER. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.