MOT Status
ExpiredMileage
82,047 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
underside coated in black sealer/shultz
Nearside Front Brake hose excessively damaged (3.6.B.4d)
Offside Front Brake hose excessively chafed (3.6.B.4d)
underside coated in black sealer/shultz
oil leak from engine
rear wiper blade split
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)
Service brake: efficiency below requirements (3.7.B.7)
oil leak from engine
rear wiper blade split
Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front coil spring fractured (2.4.C.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Road wheel distorted (4.2.A.1a)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front coil spring incomplete (2.4.C.1a)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Shock absorber has an excessively worn bush (2.7.4)
o/s/r tyre worn unevenly
oil leak on engine
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front front brake binding (3.7.B.1)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Windscreen wiper blade deteriorated (8.2.2)
coil spring fractured (2.4.C.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL03 ZNP is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BL03 ZNP, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BL03 ZNP?
You can check the full history of BL03 ZNP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL03 ZNP registered?
BL03 ZNP is a 2003 Ford Ka, first registered on 27 June 2003.
Is BL03 ZNP safe to buy?
The MOT history for BL03 ZNP shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL03 ZNP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL03 ZNP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.