MOT Status
ExpiredMileage
64,649 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
slight play in front strut top mounts
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded behind bumper (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened x2 (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
offside headlamp deteriorated pattern faint
oil leak
slight play in all top suspension mounts
various areas of corrosion
Front Lower Body has slight corrosion (6.1.B.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front Lower Body has slight corrosion (6.1.B.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake pedal spongy (3.3.B.1b) DANGEROUS
Nearside Inner Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Brake pipe slightly corroded (3.6.B.2c)
Engine management light on
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim too low (1.8)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Nearside Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
AIR CLEANER UNIT INSECURE
O/S N/S SILLS CORRODED N/S DAMAGED
Offside Headlamp aim too high and too far to the right. (1.8)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
AIR CLEANER UNIT INSECURE
O/S N/S SILLS CORRODED N/S DAMAGED
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Headlamp insecure (1.7.3)
Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear coil spring incomplete (2.4.C.1a)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
nearside rear tyre cracking
Nearside Front Headlamp aim too low (1.8)
Nearside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b) DANGEROUS
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL03 ZST is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BL03 ZST, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BL03 ZST?
You can check the full history of BL03 ZST by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL03 ZST registered?
BL03 ZST is a 2003 Ford Ka, first registered on 27 June 2003.
Is BL03 ZST safe to buy?
The MOT history for BL03 ZST shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL03 ZST have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL03 ZST. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.