2012 Vauxhall Vivaro

Manufactures engine and body covers fitted restricting full inspection

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Manufactures engine and body covers fitted restricting full inspection

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Manufactures engine and body covers fitted restricting inspection of components

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

rear axle corroded

Hazard warning switch faulty (4.4.2 (a) (i))

Manufactures engine and body covers fitted restricting full inspection

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Manufactures engine and body covers fitted restricting full inspection

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material over axle (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material over axle (1.1.11 (c))

horn slightly weak

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Brake pipe excessively corroded to flexi (1.1.11 (c))

Offside Rear Brake pipe excessively corroded to flexi (1.1.11 (c))

Offside Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Manufactures engine and body covers fitted restricting full inspection

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material over axle (1.1.11 (c))

Nearside Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material over axle (1.1.11 (c))

horn slightly weak

Brake pipes have a protective coating I.e grease/underseal, restricting inspection of brake pipes.

Horn not working properly (7.7 (a) (i))

Manufactures engine and body covers fitted restricting full inspection

Brake pipes have a protective coating I.e grease/underseal, restricting inspection of brake pipes.

Horn not working properly (7.7 (a) (i))

Manufactures engine and body covers fitted restricting full inspection

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp aim too low (4.1.2 (a))

Central Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear All direction indicators slightly discoloured (4.4.3 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear All direction indicators slightly discoloured (4.4.3 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Upper strut mounting worn

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Upper strut mounting worn

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front registration plate deteriorated (6.3.1d)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Body has a sharp edge caused by damage reverse lamp (6.1.C.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)