2005 Subaru Forester

Emissions unable to be completed no oil on dipstick (8.2.1.2 (d))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Nail in tyre ()

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement rear trailing arm front bushes (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Nail in tyre ()

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement rear trailing arm front bushes (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Coil spring worn (5.3.1 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Coil spring worn (5.3.1 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Service brake binding but not excessively (1.2.1 (f))

Shock absorbers has a reduced damping effect all four (5.3.2 (d))

Front Anti-roll bar pin or bush excessively worn D bushes (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Coil spring worn (5.3.1 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Coil spring worn (5.3.1 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Service brake binding but not excessively (1.2.1 (f))

Shock absorbers has a reduced damping effect all four (5.3.2 (d))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

rear diff leaking

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

rear diff leaking

Fluid leak, but not excessive rear differential (8.4.1 (a) (i))

Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

all front and rear brake flexible hose crimps slightly deteriorated

plastic sill trims and under trays fitted

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Fluid leak, but not excessive rear differential (8.4.1 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

all front and rear brake flexible hose crimps slightly deteriorated

plastic sill trims and under trays fitted

Front Lower Ball joint dust cover deteriorated, but preventing the ingress of dirt both sides (2.2.C.1c)

Rear Brake hose has slight corrosion to ferrules both sides (3.6.B.4e)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt both sides (2.2.C.1c)

all rear driveshaft boots deteriorated

minor oil leaks

plastic sill trims and under trays fitted

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Lower Ball joint dust cover deteriorated, but preventing the ingress of dirt both sides (2.2.C.1c)

Rear Brake hose has slight corrosion to ferrules both sides (3.6.B.4e)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt both sides (2.2.C.1c)

all rear driveshaft boots deteriorated

minor oil leaks

plastic sill trims and under trays fitted

Front Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Front Inner Anti-roll bar has slight play in a pin/bush both sides (2.4.G.2)

Rear Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Rear Drive shaft which forms part of the suspension coupling gaiter deteriorated, but preventing the ingress of dirt all (2.4.G.4e)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

all metal brake pipes covered in plastic and sealer

exhaust system deteriorated

nearside front tyre slight damage in sidewall

plastic sill trims and undertrays fitted

Front Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Front Inner Anti-roll bar has slight play in a pin/bush both sides (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Rear Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Rear Drive shaft which forms part of the suspension coupling gaiter deteriorated, but preventing the ingress of dirt all (2.4.G.4e)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

all metal brake pipes covered in plastic and sealer

exhaust system deteriorated

nearside front tyre slight damage in sidewall

plastic sill trims and undertrays fitted

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Shock absorber has a light misting of oil (2.7.3)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

clutch pedal rubber missing at time of test

unable to fully inspect both outer body sills due to plastic covers fitted to vehicle at time of test

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Shock absorber has a light misting of oil (2.7.3)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

clutch pedal rubber missing at time of test

unable to fully inspect both outer body sills due to plastic covers fitted to vehicle at time of test

Engine covers fitted obscuring some components in the engine bay

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

un-able to fully inspect outer body sills due to plastic trims / gaurds fitted at the time of test.

Engine covers fitted obscuring some components in the engine bay

Exhaust has a minor leak of exhaust gases (7.1.2)

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

un-able to fully inspect outer body sills due to plastic trims / gaurds fitted at the time of test.

Engine covers fitted obscuring some components in the engine bay

Front Shock absorber has a light misting of oil (2.7.3)

Under-trays fitted obscuring some underside components

both the front tyres are wearing uneven

the engine management light was on at the time of test.

the exhaust system is becoming corroded & weakened.

un able to fully inspect outer body sills due to plastic trims / gaurds fitted at the time of test.

Exhaust system not adequately supported (7.1.1)

Offside Outer Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Front Shock absorber has a light misting of oil (2.7.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Outer Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Under-trays fitted obscuring some underside components

both the front tyres are wearing uneven

the engine management light was on at the time of test.

the exhaust system is becoming corroded & weakened.

un able to fully inspect outer body sills due to plastic trims / gaurds fitted at the time of test.

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear diff drive shaft oil seals leaking n/s o/s.

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)